Accessories

Home/Accessories
  • Software

    $ 0.00
    Highlights
    • Complete Download of the CT-8900 software
    • or the Newest Update of the CT-8900 software
    What’s Included:
    • Link to download the version of software you need
    Downloading
    • Currently available for download from this site only to US and Canada locations.  If you are in other countries please email for a direct link: [email protected]  Include your company name, address and the serial number for your meter (the serial number is located inside the battery compartment space.)
    • 25 snaps (male and female pieces)
    • 1 punch toolset includes the punch and strike base
  • ESD Bags

    $ 5.97$ 66.97
    Overview The Static Solutions ESD bags are the ideal choice for storing your sensitive materials and products. Each size comes with a total of 100 bags per pack. “You are powerful!  Be grounded.” Highlights
    • Meets the required limits of ANSI/ESD S20.20, Packaging standard ANSI/ESD S541, and Static Control Bag standard ANSI/ESD
    • Electrical Properties Typical Values Test Procedures/Method
    • Surface Resistance:
      • Outer Surface: 1 x 104 to < 1 x 1011 ohms ANSI/ESD STM11.11
      • Inner Surface: 1 x 104 to < 1 x 1011 ohms ANSI/ESD STM11.11
    • Discharge Shielding <20 nJ ANSI/ESD STM11.31, EIA 541
    • Charge Generation Teflon: 0.09 nC/sq. in. Modified Incline Plane
    • Quartz: 0.01 nC/sq. in. Modofied Incline Plane
    • Capacitance Probe (to dissipate 1 KV) <30 volts ANSI/EIA-541/Appendix E, 1kV discharge
    • Bag Thickness:
      • Thickness Nominal 0.0030” (.0762mm) ±10% MIL-STD-3010, 1003
      • Width (Inside Dimensions) Nominal –0” / +0.125”
      • Length (Inside Dimensions) Nominal ±0.125”
    • Light Transmission >40% (Tobias) ASTM D-1003
    • Heat Seal >10lbs/in 375°F, 1/2 sec 60 psi
    • Tensile 9000 PSI ASTM D882
    • Puncture Resistance >10lbs MIL-STF-3010, 2065
    • MVTR <0.40 FTMS 101C/2065
    • Non-corrosive Pass MIL-STF-3010, M3005
    • No corrosion effect on aluminum, copper, silver, Sn-Pb coated foil, stainless steel, low carbon steel
    • Polycarbonate Capability
    • Bag is free of amines, N-octanoic acid, silicones, and heavy metals
    What’s Included:
    • 1 package of 100 ESD bags
  • Overview
    The Static Solutions Ohm-Stat Wrist Strap Coil Cord with alligator clip can safely dissipate harmful charges with long lasting protection. ESD S1.1 standard recommends the use of static control wrist straps as an effective ESD control system. Normal activity builds harmful static charges, if an ungrounded user makes contact with a static sensitive device the result can be costly and damaging. Available with a wrist strap here.

    Highlights

    • Cord with alligator clip and 1 meg resistor

    What’s Included

    • 10' coil cord with alligator clip and 1 meg resistor
  • ESD Footplate static
    Overview
    The Static Solutions Ohm-Stat FP-1745 is a plate that is for use with the Static Solutions Ohm-Stat RT-1000 Standard Resistivity Tester. It accurately measures surface resistivity and conforms to the EOS/ESD 11.11 specifications. Highlights
    • Stainless steel foot plate to test shoes
    • Measure resistance through shoes to plate
    • Works with RT-1000 and most high quality meters with two external jacks

    What’s Included

    • 1 Foot Plate
  • Overview The Static Solutions CT-1000 Ohm-Stat 1000 Meg Upgrade can be use with any current purchase of either the Static Solutions Ohm-Stat CT-8700 or CT-8900 tester. Both testers individually and simultaneously test a wrist strap and heel grounder resistivity value in less than 3 seconds. The CT-8700 is the combination tester, footplate and stand while the CT-8900 is the deluxe combination tester, footplate and stand with computer interface. (You can upgrade a previously purchased CT-8700 or CT-8900 but must contact us first at 978-310-7251 or email to make prior arrangements.) Highlights
    • Measures from 100 kilohms - 1000 megohms
    • Internal component upgrade for CT-8700 and CT-8900 testers
    What’s Included
    • 1000 Meg Upgrade
  • Overview
    The Static Solutions Replacement Heavy Duty Base Footplate Dual Feet is a durable foot plate with mounting holes that can also be used with the FS-8900 Ohm-Stat Dual Path Floor Stand. Highlights
    • Wide Base
    • Duel Foot Plates
    • Bright Yellow
    • Designed for humidity conditions of 75% or less

    What’s Included

    • Footplate Base
  • Overview
    The Static Solutions FS-8900 Ohm-Stat Dual Path Floor Stand Replacement Post is for use with Static Solutions CT-8900 and CT-8700 testers. Highlights
    • Post is black

    What’s Included

    • Metal Post
  • Overview The Static Solutions NT-1010 Ohm-Stat NIST Calibration and Certificate. Available as a Standard Calibration or with Before And After Data. Free return shipping (for the meter only) for all US and Canada calibrations. Please send only the meter (do not include any cases or accessories) to: Static Solutions, Inc. Calibrations 399 River Road Hudson, MA  01749   Highlights
    • NIST Calibration and Certificate
    What’s Included
    • 1 NIST Calibration and Certificate
  • WS-1025 ESD wrist strap SP-102 ESD Wrist Strap Grounding
    Overview
    The Static Solutions SP-102 Earth Ground Checker with coil cord and wrist strap safely dissipates harmful charges with guaranteed long lasting protection. ESD S1.1 standard recommends the use of static control wrist straps to complete an effective ESD control system. Normal activity builds harmful static charges, if an ungrounded user makes contact with a static sensitive device the result can be costly and damaging. The patented design of the wrist strap prevents the fabric of the wrist strap from interfering with contact of the user to the buckle providing a direct connection for optimal function as well as offering amazing comfort. Only the Ohm-Stat Series offers long lasting, high quality wrist straps with innovative design on a price conscience schedule. Static Solutions wrist straps are made with quality control and 20/20 conformance.  They are easily cleaned with a mild detergent.

    Highlights

    • Blue adjustable ESD wrist strap
    • 4mm machine stainless steel snap
    • Easy to plug in a banana plug terminated wriststrap
    • Tough impact: resistant high polymer is ultrasonically welded for added protection
    • Hard ground to an electrical system drains charges from the wearer
    • Provides proper grounding and prevents new charges from accumulating on wearer
    • Makes receptacles/workers/field service kits grounded properly
    • High visible LED indicator lights provide visual proof of correct ground or any common ground faults
    • Indicator lamps have wrap-around lens covers for high visibility at all angles
    • Checks the wiring faults on 3 wire, 120v circuits
    • Medical grade stainless steel
    • Includes coil cord

    What’s Included

    • Blue ESD Wrist Strap
    • 10’ coil cord
    • SP-101 Earth Ground Checker with banana plug receptical
    • Alligator clip
  • Overview The Static Solutions Ohm-Stat™ Resistance Probes for ESD Resistivity Meters can be used with our meters or for most ESD probe needs. Highlights
    • 2 five pound probes required for RTT,RTG, RTV resistance measurement
    • Coated with insulative paint (not dissipative PVC sleeves)
    • Conductive silicone rubber
    • Easy to carry insulative handles
    • NIST certificate
    • Product conforms to the ESD S.20.20 spec standards
    • Will work with all high quality meters like the Ohm-Stat™ RT-1000 and the Ohm-Stat™ RT-500 resistivity meters
    • 1 year warranty
    • Use for resistance testing of floors, work surfaces, floor mats, paints and floor finishes
    • Available are two test ground cords banana to monaural 3.5 mm plug
    • Made in the USA
    What’s Included:
    • Probes
  • MP-6533 Personal Wrist Strap Test Probe
    Overview
    The Static Solutions Ohm-Stat™ MP-6533 - Personal Wrist Strap Test Probe can be used to test for harmful static charges.  ESD S1.1 standard recommends the use of static control wrist straps to complete an effective ESD control system. Normal activity builds harmful static charges, if an ungrounded user makes contact with a static sensitive device the result can be costly and damaging. Highlights
    • Conductive metal cylinder
    • Attaches easily to most resistance testers like the Ohm-Stat™ RT-1000 resistivity meters
    • Tests most wrist straps and shoes
    • Terminated with a banana plug
    • Product conforms to the ESD S.20.20 spec standards
    • Made in the USA

    What’s Included

    • Conductive metal cylinder
Go to Top